Mar 13, To replace the subframe bushings: Remove 4 bolt bolts holding subframe to diff, and 4 bolts+nuts holding trailing arms to the subframe. Remove the stock subframe bushing by making this setup on a bench vise: The sockets go in these slits.
Have a helper hold the subframe while you set everything up. Aug 01, When removing the rear subframe on an E30, there is always a possibility that either of the two old bushings will be oxidized and therefore seized/stuck in the body.
The OE subframe bushings are made up of an aluminum sleeve with a thick rubber coating around it. The aluminum sleeve protrudes at the top of the bushing and seats into the body during. BMW e30 rear subframe bushing removel and install. BMW e30 rear subframe bushing removel and install. How To Remove Stuck BMW E30 Subframe Bushings From The Chassis When I removed the BMW E30 rear beam from the chassis, I ran into an issue where the cent.
Subject: rear crossmember bushing R&R - my method. I've been catching up on my digest reading. I've seen a couple of postings about changing the rear crossmember bushings on an E Here's how a friend & I did it: What you'll need (in no particular order): 2 new bushings and locking nuts (da!) propane torch.
Today's Posts; Member List; Calendar; Forum; E30 Technical Forums; Suspension & Unsprung; Brakes, Subframe & Arms; If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.