Call now to get tree supporting including tree removing, tree removal, bush drop, shrub clearance, stump grind and a lot of others all over USA:


Call now

Call now +1 (855) 280-15-30










My wife, Neva, and I have been driving and working on VWs since

How to easily get that [email protected]? starter bushing out, just be careful NOT to vw bus starter bushing removal anything down in there! Jan 31, Volkswagen engineers designed a Bushing Puller for the 6 Volt Starter Bushing and another for the 12 Volt Bushing. Let’s look at the Bushing Location first. In order to do this, I have a VW transmission which has been gutted and cleaned for the purpose. The first picture shows the Long-bodied Starter in place.

Feb 01, If the Bushing will not remove by pulling on the threaded tap, install a long bolt of the same threads, place vise grips at the bolt head and use a hammer to tap on the nether side of the vise grips. This should loosen and remove the treemulch.buzzted Reading Time: 1 min. Apr 07, Installation really is the reverse of removal. If installing a new bushing, oil it, then put it on the starter shaft. Then hoist the starter back up in there, and get it seated. Put the upper mounting bolt through and put the nut and washer on the lower mounting stud.

Make sure that the upper bolt's half-moon shape is engaged properly with the. Keep in mind we've already have changed the starter bushing which is a little bit harder to show or even picture then describe. Anytime you're replacing starter we always recommend that you change the starter bushing.

The starter in, the lower starter nuts tight, positive battery cables connected, ignition switch wires connected.